Beaping noise no Boot.

[Slayertime]

i just replaced my 2200+ with a 3200+ it started up fine at first saw it was all on default said 1900+ at 1.47 so i went into my bios to upp the FSB to 200mhz and now when i go to turn it on it has beaping noise and won't boot up. What to do?

[JohnE.]

Motherboard is? BIOS revision is?

Possibly it needs an updated BIOS to support the 3200+

[Slayertime]

400 FSB Ready Nforce2 SPP(Ultra 400) Chipset Asus A7N8X

[RicheemxX]

if you don't ahve the later revision of the board then you'll need to do a bios update for the 400mhz fsb. Double check that. However asus doesn't show support for the 3200 {doesn't mean it won't work tho} also need to make sure you have the straight A7n8X and not one of the other versions of the board as some don't support the 3200

http://usa.asus.com/prog/spec.asp?langs=09&m=A7N8X

[JohnE.]

Hmm... which BIOS version? According to Asus CPU Support page the A7N8X needs BIOS version 1004 or higher on a 1.04 PCB to support the 3200+

[Slayertime]

My Bios version it says is 1006

[Slayertime]

I got her up and running i just increased the FSB slowly and finally it went through. Thanks for the help guys