Ok so heres the situation...I know the processor works because i placed it in a different MB and it worked fine... I know the ram works because i did the same with that. along with the video card. My problem is that when i hook up my stuff to the K7sem board and start it up it doesnt boot up. The fans spin and what not but nothing comes to the screen. I tried using the onboard video too and that still didnt work. If you have any suggestions plzzzzz let me know.
Make sure everything is seated firmly in their slots. Check to see that the motherboard isn't shorting out on an errant post or piece of metal in the case.
im not sure i understand...u want me to place it in the bag take it out, hook it up then try booting it? or did u want me to hook it up while in the bag?
one last thing you could check is to put in another power supply in it may not be supplying enough to the motherboard also try resetting the cmos with a jumper on the motherboard or by removing the battery
Linear Mode
