help

[kyokusanaki]

i am having a problem with my soltek sl-75frn2.
i am having athlonxp2200+ but y it only display as xp1350 when it boot?pls tell me the reason....

[thekingofpain]

Possibly changing your fsb to 133 will help---it could be set at 100 presently---

[kyokusanaki]

then how about the memory?i have 256 400mhz but only display as 200?

[Dj-Icer]

where did u check your memory? in bios or my computer prop...??

[John Prophet]

There might be a jumper for the fsb...lots of boards have a jumper for that...look at the board or look in the manual. On an XP2200 the multiplier is 13.5 x 133=1800mhz but it looks like you are getting the 13.5 multiplier x only 100mhz....so you need to bump up the fsb to 133.

As for the memory it is probably already ok....200mhz for DDR= "400mhz"...cuz DDR = "double" data rate...so you multiply the hzX2.

So for instance Pc266 = 133x2 PC333=166x2 and your PC400=200x2. So I think you are straight there.

JP

[bailey]

some boards set aside some ram for video and other services and will not report as avaible ram