Any oclocker's use this mem personally here or have experience with it? It got good reviews, so I went and orderd some. 1 stick 512mb ddr400 cas3 with Samsung chips. I already know samsung mem chips (where the storage cells are) ROCK hard. Past experience. But the manufacturer's SPD chip can reek havoc on Nforce2 mobo's! Gpt it from Newgg $80~ shipped. I chekced their homepage and the SPD chip is Winbond. Its approved for my A7n8x deluxe. Replacing my Kingston Value Ram pc 2700 2x256mb with half incompat spd chip. Its not on Asus list and fails mem test once and a while.. I could get like 2.0 somthing gig oclock outta my 2500+ AQXDA chip. But had to use high multi. Hoping that this will allow the 'ole 11x200 setting stable instead of 12.5x setting.... My multi being higher actually took more vcore to boost stable at = mhz that fsb increase got on stock vcore. So I "think' with 200fsb Its pretty good bet I'll get 3200+ outta her. With 11x multi I can raise the fsb till mem fails without touching vcore. Any opinions on this mem brand please share. thanks.
Linear Mode
