Xp dont recognice the raid 0?

[BuSaN]

After lots of troubel geting my computer to start correctly with the raid 20726, xp does not recognice that I run a RAID(0) system
it just sais that I got 1 hdds
C: 8mb
E: 114GB

I install the FastCheck Monitoring tool and it tells me this:

------------------------------------------------------
RAID Mode : STRIPING

Block Size : 64 (KB)

Mapping : 29893 Cyls
: 255 Heads
: 63 Sectors

Size : 228.991 GB

Status : Functional

----------------------------------------------------------
ARRAY 1
----------------------------------------------------------

Maxtor 6Y120P0
Status : Functional

S.M.A.R.T.
Status : Functional

Size : 114.498 GB

Location : Controller #1
: Channel #1
: Master

Mapping : 238216 Cyls
: 16 Heads
: 63 Sectors

Timing : UDMA Mode 6

Encl. Type : None
----------------------------------------------------------
disc 2
Maxtor 6Y120P0

Status : Functional

S.M.A.R.T.
Status : Functional

Size : 114.498 GB

Location : Controller #1
: Channel #2
: Master

Mapping : 238216 Cyls
: 16 Heads
: 63 Sectors

Timing : UDMA Mode 6

Encl. Type : None
------------------------------------------------------------

Where are the last 114 gb??!?!

[Siliconjunkie]

If you don't aready have data on it, I would remove and recreate the array. Also make sure that you have the right drivers loaded.