will this video card work

[daniel brooks]

i have a abit ic7-g motherbaord that can support 0.8v / 1.5v will this video card work

CHAINTECH A-FX20, Geforce FX 5200, 128MB DDR, 128-bit, DVI/TV-Out, 8X AGP, RETAIL
Specifications:
Chipset/Core Speed: Geforce FX5200/250MHz
Memory/Effective Speed: 128MB DDR/400MHz
BUS: AGP 1X/2X/4X/8X
Ports: VGA Out(15 Pin D-Sub)+TV-Out(S-Video Out)+DVI connector
Support 3D API: DirectX®9, OpenGL®1.4
Cable/Accessories: S-Video Cable, Driver CD, Manual
Max Resolution@32bit Color: 2048X1536@75Hz
Retail Box (See pics for details)

[slinky]

Yes, it will.

[JacobM5727]

8X AGP

thats about all that matters

[Slaved]

Yeah it will work but the cards leave a little to be desired for.I have an mx 440 8x that does almost as good and is cheaper.

Shawn

[Etruscan]

While we are on the subject of "Will this card work?", correct me if I'm wrong, but don't all 4x video adapters work at 1.5volts and 1x and 2x work 3.3volts? It is the 1X and 2X video adapters like an old voodoo that will damage a new board - isn't it?

[Omardeth]

Originally posted by Etruscan
While we are on the subject of "Will this card work?", correct me if I'm wrong, but don't all 4x video adapters work at 1.5volts and 1x and 2x work 3.3volts? It is the 1X and 2X video adapters like an old voodoo that will damage a new board - isn't it?

that will all depend on the motherboard . if the motherboard says the agp slot is 1x and 2x compatable that would tell me that it will bump up the voltage for those cards if it is detected .

if the agp slot is only 4x or 8x then yes , the older agp cards won't work . as for hurting the motherboard that i am not sure up . i know some motherboards say it will .