I got the latest version.
Latest Firmware.
Clean WindowXP Home installed.
Still not able to make Nero make a copy of a disk for me.
All they suggest from their Tech support is to me to turn DMA on.
Right click on my Computer/properties/hardware/device manager/IDE atapi controllers/right click on primary and secondary Channels/properties/advanced settings/DMA if available.
I got it ON right..? So why does in my Log files still shows as it is OFF?
And that is why may be it is not working.
How can turn DMA on any other way?
Please I know there someone knows..
Enlighten me, please.
Thank you. i will attach one of my Logs here. after this line.
__________________________________________
Carlos
Kaliman
1A23-0006-7130-1201-XXXX-XXXX
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero version: 6.0.0.19 (Nero Express)
Recorder: <PLEXTOR CD-R PREMIUM> Version: 1.04 - HA 1 TA 0 - 6.0.0.19
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON LTR-48125W >Version: VS0D - HA 1 TA 1 - 6.0.0.19
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1000JB-00CRA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PLEXTOR CD-R PREMIUM atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON LTR-48125W atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
PLEXTOR CD-R PREMIUM D: CDRom0
LITE-ON LTR-48125W E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1047824kB)
Free physical memory: 722MB (739432kB)
Memory in use : 29 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.11.2003
CD Copy
8:23:43 PM #1 Phase 158 File dlgbrnst.cpp, Line 1843
Buffer underrun proof activated
8:23:43 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
8:23:43 PM #3 Phase 48 File dlgbrnst.cpp, Line 1843
Analyzing disc
8:23:43 PM #4 CDCOPY -1 File CDCopy.cpp, Line 1868
The CD is copyrighted
8:23:44 PM #5 Text 0 File CDCopy.cpp, Line 2084
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 335263 335262 ( 74:32.12)
8:23:44 PM #6 Text 0 File CDCopy.cpp, Line 839
Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: OFF
data options
ignore read error: ON write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc does not look like CD Extra
01. 0 - 335263 = 335263, data (TRM_DATA_MODE1, block size 2048)
8:23:44 PM #7 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using CD-R/RW media
8:23:45 PM #8 Text 0 File DlgWaitCD.cpp, Line 230
Last possible write address on media: 359847 (79:59.72)
Last address to be written: 335262 (74:32.12)
8:23:45 PM #9 Text 0 File DlgWaitCD.cpp, Line 235
Write in overburning mode: FALSE
8:23:45 PM #10 Text 0 File DlgWaitCD.cpp, Line 1949
Recorder: PLEXTOR CD-R PREMIUM;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 90, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
8:23:45 PM #11 Text 0 File DlgWaitCD.cpp, Line 394
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:23:45 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 335263 (335263) = #335263/74:30.13
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 335263 blocks [PLEXTOR CD-R PREMIUM ]
--------------------------------------------------------------
8:23:45 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [PLEXTOR CD-R PREMIUM ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 686925824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
335263 | lead-out | 1 | 0x00 | 0x41
8:23:45 PM #14 Phase 36 File dlgbrnst.cpp, Line 1843
Burn process started at 52x (7,800 KB/s)
8:23:45 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:23:45 PM #16 Text 0 File Mmc.cpp, Line 14686
StartDAO : CD-Text - Off
8:23:45 PM #17 Text 0 File Mmc.cpp, Line 19195
Set BUFE: Buffer under run proof -> ON
8:23:45 PM #18 Text 0 File Mmc.cpp, Line 15006
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4a 20 0d
8:23:52 PM #19 TRANSFER -25 File Reader.cpp, Line 371
Error reading Data
8:23:52 PM #20 Text 0 File ThreadedTransfer.cpp, Line 234
conversion failed, stopping writers
8:23:53 PM #21 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
8:23:53 PM #22 Phase 38 File dlgbrnst.cpp, Line 1843
Burn process failed at 52x (7,800 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 2:27:50 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Linear Mode
