Asus P4C800-E Delux Fan problem

[vizo]

I connected a fan to the "CHA_FAN" Connector (bottom right) and the wires of the fan were crimped and exposed and up against the case. This seems to have done something to something that has made the connectors cease to function. The "PWR_FAN" does not work either, yet the "CPU_FAN" does. I was wondering if their is a jumper to reset this or some way to fix this.

I'm hoping that this will not have damaged anything else. It seems to run fine. Any input is appreciated.

Try unplugging the ATX connector from the board for about 10 seconds, then plugging it back in.

[vizo]

With PSU turned on or off? Off I would assume, but..

Yes, OFF.

It may have shorted out the fan header though.

[vizo]

Is that fixable? Will try it here in just a minute and see..\\

[edit] i just tried it and no luck

If the header is shorted, I doubt it. Maybe by someone that can do PCB repairs. I wouldn't mess w/ it. Just use a different header or use fans w/ the 4-pin Molex connectors instead.