PC 400 question

[weemoney]

Does a PC400 P4 M925 series motherboard have an AGP slot of 1.0 or 2.0?

[Uncle Bob]

Originally posted by weemoney
Does a PC400 P4 M925 series motherboard have an AGP slot of 1.0 or 2.0?

That info should be in your manuel on the specs page.

[weemoney]

I have read the manual front to back and it does not tell me anything

[daveleau]

Looks like it is a 4x AGP slot. The info I got was by searching Google for "PC400 P4 M925". I am not familiar with that mobo at all. If it is called something else or if you could give the manufacturer, it'd help. Thanks.
Dave

Is this it?
http://www.baber.com/baber/411/pcchips_m925lr.htm

[John Prophet]

OK, evidently agp 1.0 was the old thing that only went to 2x.

And if its 4x (which it is) then it has to be agp 2.0.

I doubt you could find a new board that is agp 1.0

http://www.motherboards.org/articles...ons/920_2.html

JP

Also noted that the spec showed the INTERNAL agp as 8x

Here is the chipset page from VIA http://www.viatech.com/en/ProSavage%...sets/km266.jsp

[Uncle Bob]

If none of the printed material with the MOBO. Look at the outside
of the box(small chance). You'll have to go to the web sight,to tech support. If you bought it from a store a sales clerk may know.
Ijust used up all my ideas.

[John Prophet]

and there it is on the page daveleau posted


"Embedded 3D AGP Graphics Accelerator in North bridge; AGP rev. 2.0 spec. compliant."

JP

[weemoney]

That is my mobo, the manual says no manufactuer name, support number or tech site, I've been trying to install a PNY tech graphics card and when done my computer turns on, likes fans and all that, but no boot screen

[weemoney]

I've tried disabling my display adapter in my hardware manager and bumped my aperture setting to 128 mb and still no boot screen, no monitor action no beep, just fans and cd rom action