Anyone have the real skinny on setting up v.92 on Conexant based modems?

[zepper]

Thanks for looking,
. Trying to get this new v.92 modem going and keep runnning into ditches and walls. I've got all the latest drivers, firmware and software installed but they seem to be putting a drag on things.
. Among other things, I've heard that the mohser.vxd driver that comes with the modem drivers is supposed to be installed in place of (or with) serial.vxd (the standard COM: port driver). But when I do that (by the simple expedient of renaming the files, NW doesn't want to run. And when I put serial.vxd back in place, NW will run but puts an unacceptable drag on my surfing.
. Glad for any tips from knowledgable RR/TIMO denizens.
p.s. Well, I found that the new version of NW from the bestdata.com site does load the mohser.vxd when you run it. So apparently you have to run NW before dialing. But NW still clogs the surfing almost totally. Hellllllppppp...
:confused;


Note: Well, I guess it's working now. I'm not sure what the magic combo is but I think you have to use W0 in your init string so that the modem reports DTE rather than DCE and load NW before you ever try to dial out - so I guess I'll put NW in the Startup folder. I don't know yet if the mojo will hold over a disconnect and reconnect, but I will add another note here as I get more experience with v.92.
. Thanks to anyone who looked.
.bh.

[sixf00t4]

glad to see it is working!