Water Cooling Confusion??

[kantlivelong]

i was gonna buy the swiftech h20-22500 kit, but i dont want to use the fans,power,and fill&bleed kit. so im buying the same stuff seperately and making my own fill valve..

below is what i have

----------------------

Pump : $56 - http://www.frozencpu.com/cgi-bin/fro...html?mv_pc=976

Rad : $43 - http://www.frozencpu.com/cgi-bin/fro...tml?mv_pc=1219

Powerplant : $30 - http://www.frozencpu.com/cgi-bin/fro...tml?mv_pc=1279

CPU Block : $53 - http://www.frozencpu.com/cgi-bin/fro...tml?mv_pc=1108

Coolant : $12 - http://www.frozencpu.com/cgi-bin/fro...tml?mv_pc=1339

Tubing : 7FT UNKOWN

Reservoir : $5 - http://www.frozencpu.com/cgi-bin/fro...tml?mv_pc=1384

Tee : UNKNOWN

Valve : $7.50 - http://www.frozencpu.com/cgi-bin/fro...html?mv_pc=815

---------------

i dont know what i need to make this all work, ive tried constantly but cannot think that far into it without acctually having the products here..

if possible can someone help me find what i need?

the Tee and Valve are for my own fill system.

i can only buy from http://frozencpu.com

Thanks for your help!

[Nobody077]

Here are a few pics of my pieced together water cooled system.
I went with a DangerDen Maze2 water block, a ViaAqua 1300 pump($25 at online fishpond store), and a Hayden 6 pass trany cooler($29 at local AutoZone). Every thing is linked with 1/2 id tubeing. The switch on the front of my case you see is for the pump, I leave the pump on all the time unless I am out of town. I cut holes for the tubeing in the top of the case, along with a vent hole for a 120mm fan pulling air in the case through the radiator. I plan to add a resevoir when I do my MB upgade, the only reason is to make filling the system easyer. You will put the resy just before the IN side of your pump. Hope this gives you an idea to work from, my water system cost me under $100 and keeps my OC'ed 1600+ at 2-3c above room temp, at full load

[Idigguns]

Welcome to TechIMO, Nobody! Nice set-up you have there. Kantlivelong, looks like you have most everything you need. Piece it all together when you get it and see if there's anything you want to add. A trip to Home Depot or Pep Boys will probably take care of it. You can always add more stuff later, as well. Let us know (with some pic's) how you make out.

[kantlivelong]

ok thanks guys.. i just remembered that id be taxed if i was to buy it from that site so im just gonna get a swiftech kit and mod it..