Is this a problem?

[Jarhed7276]

Upgraded a pc for a friend. I put a P4 (Northwood) 1.8 in a Abit BH7. Also put in a new Antec 350 watt ps. The cpu core voltage should be 1.5 but according to Aida32 it's 1.46. Is this a problem?
Everything seems to be working fine. The only thing unusual I've noticed is that the ps temp is the same as the cpu temp(42° C) but I attribute this to the old P2 case that it's in.

Other voltages are:

+3.3 = 3.26 to 3.31
+5 = 4.97
+12 = 11.98 to 12.04
+5 standby = 4.92 to 4.95
Vbat battery = 3.17
Dimm = 2.53 to 2.56
Dimm VTT = 1.23
AGP VDDQ = 1.52

Thanks, I just wanted to make sure that I'm not giving it back to him with a ps that has or is going to have problems.

Gerry

[Darthgary]

1.46 Volt is fine lol.

42C is a good temp for a P4.

[Jarhed7276]

Thanks Darthgary.

I knew the cpu temp was good but the ps temp had me concerned. My P4 2.53 idles @ 41° C but the ps temp is 32° C.
I was worried that his ps temp being so high and the cpu core voltage being lower than 1.5 it might indicate a problem with the ps.
Thanks for putting my mind at ease.

Gerry