Opening ports on Linksys BEFWS114

[tgxiii]

I have 4 computers hooked up to my Linksys BEFWS114 and I want to open up 4 different ports for each computer. The problem is, there are only 10 slots available in the firmware's port forwarding. I tried using ranges (Ext. Port 4443 to 6112) but that doesn't seem to work. It only works for small ranges, like 5190 to 5193. Does anyone know how I can add more slots in order for me to open all the ports I want?

[tedroddy666]

i have a linksys befsr41 and i can't open any port either. its a mystery to me how i can download things using kazaalite

i wanted to open ports 22, 80, and 8080 for my webserver. well i want to have them forwarded to me. i have 4computers also. i ended up paying for two cable lines, and my webservers on the other cable line, with no router.


bahh ...

[tedroddy666]

try updating the firmware, i can add as many slots as i want, but none of them actually get forwarded...

[John Prophet]

I have the bfsr41...I only forwarded one port...for safety to have it stealthed..I forwarded the port into a nothing IP address.

Id go to linksys site and look thru the faqs etc....and also try searching some gaming sites..the online gamers probably know this stuff cold.

JP

[tgxiii]

Thanks for all the suggestions, but I've tried most of them. I've ran searches on the web, updated the firmware, and looked through the Linksys website. If it's out there, I probably overlooked it....

[phenious]

http://192.168.1.1/Forward1.htm

or the UPnP button on the Forwarding page in the router allows for a few more extra ones as well as some standard ones... try that and of course DMZ opens all ports to 1 computer :P can one DMZ a range...?

-: phenious :-

[burfy]

When i go to http://192.168.1.1/ to open my ports...
the annoying, This Page Can Not Be Displayed
webpage came up....If you know how to help me please reply.