Asus P4t533-C question

[dougdaniels]

System:

Asus P4t533-C motherboard 512MB of PC1066 memory and a P4 2.667 processor installed on the board.

Problem:

Getting frequency out of range errors. I have tried to set the bios to both jumperless and jumpered and when I use the correct settings (or what I beleive to be the correct settings) I get the same error.

Settings:

CPU External Frequency: 133 / 66 / 33
Multiplyer: 20

What am I doing wrong? How can I correct the frequency error and still run the system at the 533 front side bus that it is capable of?

[KJ0055]

can u change the multiplyer? I thought the 2.66 was 18X multiplyer check that online and if im right change it...try different slot for memory as well...the RAM is key in some frequency issues. I had a simliar problem because my frequency was to high for the RAM i was using. Fixed it by setting the RAM speed to a higher level so that it would allow it to run at the higher frequency.
Good Luck