»
 

Go Back   ResellerRatings Store Ratings > ResellerRatings Forums > Tech Support

Reply
 
LinkBack Thread Tools Display Modes
Old 07-27-2003, 02:46 PM   #1 (permalink)
Registered User
 
cruiserlck's Avatar
 
Join Date: May 2003
Location: Liberty , Ky
Posts: 85
cruiserlck is on a distinguished road
Send a message via ICQ to cruiserlck Send a message via Yahoo to cruiserlck
Motherboard monitor 5 and cpu temps

I have an Asus A7N8X dlx. rev 2 and a barton 2500 @ 2.2ghz , 11 x 200 , 1,65 vcore with a volcano 9 and A.S.3 . I was told that the asus temp utility wasn't that accurate so I got MBM5 instead and used it. It shows that I have 2 temp sensors for my cpu one will read 42 C , and the other will read 53 C. So wich would be my true temp? I sure hope it's not 53 C , I figured it'd be more around 40 C with this volcano 9 and artic silver 3. Plus I have plenty of case cooling so it's getting plenty of air , 2 in front , 2 in the side , 1 in the back , and 1 in the top, all of them are 80mm. All are blowing in except for the one in the top and the one in the back. MBM5 says that my board temp is 28 C . The room this things in is around 80 F so I thought 42 C was pretty good but what about the other temp?53 C ? Any thoughts ?

cruiserlck is offline   Reply With Quote
Old 07-27-2003, 03:26 PM   #2 (permalink)
Registered User
 
Gait_Keeper's Avatar
 
Join Date: Feb 2003
Location: Da Bronx, NY
Posts: 1,709
Gait_Keeper is on a distinguished road
Send a message via AIM to Gait_Keeper
53C is your AMD
the lower number is the temp inside youre case
Gait_Keeper is offline   Reply With Quote
Old 07-27-2003, 04:54 PM   #3 (permalink)
Registered User
 
Join Date: Jun 2003
Location: Calgary,AB
Posts: 90
cyclist110 is on a distinguished road
I get those temps when o'cd to 2.2 with my 2500. Thats pretty normal especially with that room temp.
__________________
C.

xp2500 barton
Epox 8rda+
SLK 7 w/ 80mm evercool
2x Micron 256 pc3200 DDR
Radeon 9100 128DDR
XP pro sp1
IBM deskstar 46gb
Maxtor 20gb

cyclist110 is offline   Reply With Quote
Reply




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Most Active Discussions

Recent Discussions

All times are GMT -6. The time now is 01:33 AM.