Netgear IP Address

[Germain]

Hi,

Can anyone tell me what my problem is. Since I installed My Netgear Router

1- Nobody has access to my computer using their Cute FTP and trying to connect to my War FTP.

2- I can't use a password when I use Win XP Remote Assistance.

3- When I go to DOS and type ipconfig, I get

Ethetnet Adapter local Area Connection
IP Address 192.168.0.3
Subnet Mask 255.255.255.0
Default Gateway 192.168.0.1

and on my second computer I get
Ethetnet Adapter local Area Connection
IP Address 192.168.0.2
Subnet Mask 255.255.255.0
Default Gateway 192.168.0.1


insted of my real IP Adress which is 66.0.0.0
(i removed your real ip address for secuirty reasons on your part Germain GZ3)



Here are the settings on my Neatgear Router

Basic settings

Account Name (If Required)
Domain Name (If Required)

Internet IP Address
Get Dynamically From ISP
IP Address 0.0.0.0
IP Subnet Mask 255.255.255.0
Gateway IP Address 66.0.0.0

Domain Name Server (DNS) Address
Get Automatically From ISP

Primary DNS 0.0.0.0
Secondary DNS 0.0.0.0

Router MAC Address
Use Default MAC Address
_________________________________________________

Router Status

Account Name
Firmware Version 4.11 RC24 Nov 11 2002

Internet Port
MAC Address 00:09:5b:32:5c:49
IP Address 66.0.0.0
DHCP Client
IP Subnet Mask 255.255.255.0

LAN Port
MAC Address 00:09:5b:32:5c:48
IP Address 192.168.0.1
DHCP Server
IP Subnet Mask 255.255.255.0
__________________________________________________ __

Attached Devices

# IP Address Device Name MAC Address
1 192.168.0.2 jean-ewem9owxfb 00:50:ba:86:30:b9
2 192.168.0.3 germain 00:e0:29:28:97:b0
__________________________________________________ _

Port Forwarding

Service Name Server IP Address
SERVICES FTP TELNET HTTP PPTPAPPLICATIONS NETMEETING CU-SEEMEGAMES HALF-LIFE QUAKE III . . .

# Service Name Start Port End Port Server IP Address
1 FTP 2652 2652 192.168.0.3
2 Windows 3389 3389 192.168.0.3
________________________________________________

LAN IP Setup

LAN TCP/IP Setup

IP Address 192.168.0.1
IP Subnet Mask . . . 255.255.255.0
RIP Direction Both None In Only Out Only
RIP Version RIP-1 RIP-2B

Use Router As DHCP Server

Starting IP Address 192.168.0.2

Ending IP Address 192.168.0.50

Address Reservation

# IP Address Device Name MAC Address
__________________________________________________ __
Remote Management

Turn Remote Management On

Remote Management Address:

http://66.0.0.0
__________________________________________________ __


Please help
Thank you
Germain

the router uses nat technology.

which means it will be the one who takes the ip address that your provider gives you. then with nat it will share it out to all the computers behind the router. so it will give you a 192.168.1.* number.

here is a great site to help you go more indepth
http://computer.howstuffworks.com/router.htm

now if you have an ftp server behind your router, you will need to forward the correct port you are using for your ftp prog (if you havent changed it then its 21) If you do have this forward then i suggest the people who are trying to connect turn off passive mode. What ftp program are you using? Most ftp progs have an area for you to set up if you are using it behind a router.

when you give out your ip address you will need to give them your 66.0.0.0 number not your 192.168.1.*

What router model are you using? I also see that your firmware is from 2002 i suggest seeing if they have an newer verison of firmware for you to install

[Germain]

My Netgear router is Model RP614

Originally posted by GroundZero3
the router uses nat technology.

which means it will be the one who takes the ip address that your provider gives you. then with nat it will share it out to all the computers behind the router. so it will give you a 192.168.1.* number.

here is a great site to help you go more indepth
http://computer.howstuffworks.com/router.htm

now if you have an ftp server behind your router, you will need to forward the correct port you are using for your ftp prog (if you havent changed it then its 21) If you do have this forward then i suggest the people who are trying to connect turn off passive mode. What ftp program are you using? Most ftp progs have an area for you to set up if you are using it behind a router.

when you give out your ip address you will need to give them your 66.0.0.0 number not your 192.168.1.*

What router model are you using? I also see that your firmware is from 2002 i suggest seeing if they have an newer verison of firmware for you to install

http://www.netgear.com/support/products/RP614.asp

here is the info on the router.


the firmware update it there for you. check the date out. and the manual on how to use the router is on there also

[Germain]

Originally posted by GroundZero3
http://www.netgear.com/support/products/RP614.asp

here is the info on the router.


the firmware update it there for you. check the date out. and the manual on how to use the router is on there also

Thank you, I will do my homework and try to resolve my problems.

I'll ket you know if I succeeded.

Thanks again.

what ftp program are you using?

[Germain]

Originally posted by GroundZero3
what ftp program are you using?

War FTP 1.65

http://www.warftp.org/faq/warfaq.html


you might want to look around here to see if there is any special settings for being behind a router