overclocking compaq P200mmx

[smileypie]

Hey, I am going to build a new system (thanks to the info on these forum) but in the meantime I would like to overclock this machine. I read that I should be able to go to 290. Inside my machine there is a sticker that shows the pin jumpers settings. It says for 233Mhz use processor speed select pins 2-3, clockmultipier pins a1-a2,b1-b2. I tried all of that and according to wcpuid it was like 160Mhz. How do I do it. I was told that it would not be much different, but I would still love to do it. Mainly for the experience. So help me. There is also a P10 right next to P9 that nothing lists, I checked the manual and the little sticker inside does not mention it either P10 has 2 pins and no jumper.

My modle # is 4808 64mb ram

thanks

[Brainchild]

everything I could find on that system says that 233mmx is the limit

[thekingofpain]

Easiest way to overclock that is to get going about 110mph in your car and have someone toss it out the window---

[wju425]

Some mobos will let you do 4x66=266 by putting jumper on multiplier 2x. Or you can see if you can set your fsb to 75 with a multiplier of 3.5x (262.5).

\o/ Billy

[Friar_Josh]

All of the combinations should come with some sort of label that starts with slow.

slow, slower, slowest, god is this thing slow.....ad infinitum