HELP ASUS MOTHERBOARD RESTARTING

[fufiter9246]

Hey guys big problem....ok i just built a new computer and i have an Asus A78NX Deluxe motherboard....it was fine i connected everything but i didnt reinstall winxp i just let it stay in....now when I get into windows it quickly flashes this blue screen with all this information and it restarts, the blue screen is flashed for like a half a second so i can't read it.....anyone had this problem????

Also I have Crucial 256 and 512 RAM installed, i heard of problems but nothing like this, any ideas?

Your problem is more than likely that fact that you swapped all the hardware before cleaning out "Device Manager".

Your new mobo probably has a different chipset than the old. You could try putting everything back on the old mobo and then go into "Device Manger" and getting rid of the devices under "System Devices" that correspond with your old chipset. Same with IDE controllers, sound/video if they're onboard, NIC's, modems, etc . . .

After removing the devices, shut down and then put everything back on your new mobo. You should be greeted with XP finding all the new PnP devices and some friendly rebooting.

If not, you're looking at a fresh install of XP (which is what I would do in the first place)

[Manfordjinsen]

You usually have to reinstall windows when you switch motherboards, although you could try rebooting into safe mode and the uninstalling all the drivers in your device manager then rebooting normally.

[fufiter9246]

something about a IRGL_NO_LESS_OR_EQUAL error and after i formattd the C drive it gave me a setupdrl error? Same blue screen, said i should disable caching or shadowing or updating the BIOS????

[fufiter9246]

now i have a kdbclass.sys file missing???

I'd go back into your BIOS and set it to the "Defaults".

Post up what your system specs. are besides your mobo and RAM.

Mobo - Asus A78NX Deluxe
RAM - 256MB + 512MB what speed?
CPU -
HDD -
Video -
Sound -

That should do.

[fufiter9246]

CPU - AMD Athlon 2500+ Barton
Hdd-some old IBM and a 120GB Western Digital
Video- ATI Radeon 9500 Pro
Sound - onboard soudn

[fufiter9246]

took out the IBM which used to be the old C and made the 120gb the master drive and now it won't go into the windows setup off of the boot cd in the cd drive, just hangs on this black screen

Probably an incorrect jumper setting.

What speed(s) are your RAM modules?

[fufiter9246]

256 and 512, now i disabled caching in the BIOS b/c it said i should, and now i am able to get to the windows setup, however it is hanging on "Starting up Windows" in setup......should i reenabled caching?