NEED HELP!

[BeeQuewl]

So the most ive ever got into overclocking was changing the BIOS settings for my 1.2gig athlon....so....

...ive got this 900 Duron in this A7PRO mobo...i want to run it faster...but i cant use the bios to do it...the jumper settings are all set for jumper free mode...dont have a manual (these are donated parts)...is there anything i can do?

Pertinant info :
A7PRO
duron 900 mhz
128 mb ram
20 gig hd
geforce mx something
lot of case light mods and 2 LCD's
Win2K

anyone want to offer any help? or maybe some suggestions? or even good jokes about newbs posting in forums they dont know anything about?

[Omardeth]

http://www.asus.com/support/download...04.pdf~zaqwedc

there is the link to the manual that should help ya out some .

[Omardeth]

we were all n00bs at one time myfriend

http://www.resellerratings.com/forum/t4538.html here's an old thread that might help just do a quick search for your mogo and oc'ing but you'll need to d/l the manual to get all the info on changing things

i'll be throwing in more links so keep an eye out

http://www.hardwaresecrets.com/a7pro.html

http://firingsquad.gamers.com/hardwa...00/default.asp

google search turned up some more but i'm not wedding through them all sorry

http://www.google.com/search?q=ASUS+...&start=20&sa=N

[Urban_Squrill]

I have been overclocking and modding fora a while. I am decent at it. and i am the bigest n00b.

[Bruneau]

A while Urban? More like a couple o' months maybe.

[BeeQuewl]

ok i checked the manual and the jumpers are all set right for jumper-free mode but the bios is still all locked out...cant switch it to user define...

i could set the jumpers to whatever setting would be good...but i dont know what setting would be safe...i dont want to burn this chip cuz it runs my HTPC and it would sukk to toast it


suggestions on what setting to use? anyone have a similar chip and same board? any thoughts? what would be "too dangerous" temp-wise?

[BeeQuewl]

well...i tried some settings--lucky nothing burnt... anyone want to field my questions from the previous post?

[MrPurple]

Quick question:
Does it let you make the changes, but resets all the options back to what they were before, or does it simply not let you make any changes whatsoever?

Check your BIOS there might be a setting that will block you from making any changes to your FSB, and multiplyer, etc.
I rember I had an old ASUS PII board wich had a setting which would not let me chenge anything, even go into user define untill I turned it off. It was a while ago, and the Asus site seems to be down at the moment, so I am sorry but I can't give you more details.

Hope this helps.

[BeeQuewl]

all optiions are greyed out...so i cant select user define on the settings.... ive seen pages talk about bridging the L1 and L2 gaps.....any thoughts ?