New A7N8X Dead : (

[tweeker_nvr_slp]

Help Please Brand New A7N8X-Delux pcb 2.0 with AMD2500+ BARTON core 2XcorsairXMS3200 512mbDDR400Dual Channel ATi RADON9700pro 80gig seagate Serial ATA , all brand new out of box installed in brand new case LED dont light up nothing i want to use it so bad but nothing dead as hell please give me some sugg ..... no smartass remarks please im already prettysad ---------------> thank you

[skuz]

Well if LEDs don't even light up, there are 2 possibilities : either their connector are reversed, or your power supply doesn't work.

Is the power switch connected correctly to the board ?

[cbuddha42]

hard to reverse 20pin atx connector but your board might be shorting out on the case

[zidane182]

does the green light on the bottom of the motherboard light up? That light tells you if the power is working.

[Atomic Rooster]

This has gotten me once, make sure the power switch on the back of the power supply is on.

[cbuddha42]

yea light is on 3.3 or 5v though so if you just shorted your 12 or only your 12 rail is bad it will still come on

[skuz]

cbuddha, I meant the 2 pins switch connector, not the power connector. If it's not on the 2 right pins it won't do anything.

Check Atomic Rooster's suggestion first, I think everyone has to make that mistake once.

[cbuddha42]

ah yea i know what you mean now those headers with a bunch of pairs of pins for all the switches and leds can be a bit weird the first time

[meese]

Your father was a Hampster, and your mother smelt of elderberries.

How can a 5lb swallow carry a 10lb coconut? Maybe it was an African swallow.

Classic!

Sorry I can't help with your problem. But maybe I can make you smile.