cd burning problem.... ;/

[austintatious]

i'm running windows xp w/ sp 1
i have an Optorite 48x24x48
i've tried several different cd burning programs, and i've tried burning various files

this is the log that nero creates...

1502-4360-1115-0601-0090-2580

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/6/2003 10:11:32 PM
Nero Version: 5.5.10.3 (Nero Express)
Recorder: <OPTORITE CD-RW CW4801> Version: 180E - HA 1 TA 1 - 5.5.10.3
Adapter driver: <nvidesm> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <ATAPI DVD-ROM 16XMax> Version: 1.12 - HA 1 TA 0 - 5.5.10.3
Adapter driver: <nvidesm> HA 1
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : SiI RAID 0 Set 0 si3112r Port 0 ID 0 DMA: ?
CdRomPeripheral : ATAPI DVD-ROM 16XMax 1.12 nvidesm Port 1 ID 0 DMA: ?
CdRomPeripheral : OPTORITECD-RW CW4801 180E nvidesm Port 1 ID 1 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 704MB (721016kB)
Memory in use : 31 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off

7.6.2003
CD-ROM (ISO)
11:35:07 PM #1 Text 0 File Isodoc.cpp, Line 7328
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:35:07 PM #2 Phase 72 File dlgbrnst.cpp, Line 1649
BURN-Proof activated

11:35:07 PM #3 Text 0 File Reader.cpp, Line 115
Reader running

11:35:07 PM #4 Text 0 File Writer.cpp, Line 123
Writer OPTORITE CD-RW CW4801 running

11:35:07 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4546
First writeable address = 0 (0x00000000)

11:35:07 PM #6 Text 0 File Burncd.cpp, Line 3798
Turn on Track-At-Once, using CD-R/RW media

11:35:07 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 670
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 126801 (126801) = #126801/28:10.51
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

11:35:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 203
Last possible write address on media: 359847 (79:59.72)
Last address to be written: 126800 (28:12.50)

11:35:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 208
Write in overburning mode: FALSE

11:35:07 PM #10 Text 0 File DlgWaitCD.cpp, Line 1452
Recorder: OPTORITE CD-RW CW4801;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

11:35:07 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 822
Prepare recorder OPTORITE CD-RW CW4801 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 259995648

11:35:07 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 850
Removed 2 run-out blocks from end of track 1.

11:35:07 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 670
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 126801 (126801) = #126801/28:10.51
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 126799 blocks [OPTORITE CD-RW CW4801 ]
--------------------------------------------------------------

11:35:07 PM #14 Phase 36 File dlgbrnst.cpp, Line 1649
Burn process started at 24x (3,600 KB/s)

11:35:07 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1963
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

11:35:07 PM #16 Text 0 File Mmc.cpp, Line 17116
Set BUFE: BURN-Proof -> ON

11:35:15 PM #17 SCSI -500 File Cdrdrv.cpp, Line 1400
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x023C0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

11:35:15 PM #18 CDR -500 File Writer.cpp, Line 331
SCSI/IDE Command aborted

11:35:15 PM #19 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

11:35:15 PM #20 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader

11:35:19 PM #21 SCSI -1065 File Cdrdrv.cpp, Line 1196
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00

11:35:19 PM #22 MMC -1065 File WriterStatus.cpp, Line 191
Invalid command

11:35:19 PM #23 TRANSFER -18 File WriterStatus.cpp, Line 191
Could not perform EndTrack

11:35:19 PM #24 CDR -201 File WriterStatus.cpp, Line 194
Invalid write state

11:35:19 PM #25 TRANSFER -18 File WriterStatus.cpp, Line 194
Could not perform EndTrack

11:35:19 PM #26 Text 0 File Mmc.cpp, Line 12161
<OPTORITECD-RW CW4801 > start Close Session

11:35:19 PM #27 SCSI -1176 File Cdrdrv.cpp, Line 1196
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x04

11:35:19 PM #28 MMC -1176 File WriterStatus.cpp, Line 233
Session fixation error

11:35:19 PM #29 TRANSFER -19 File WriterStatus.cpp, Line 233
Could not perform Fixation

11:35:19 PM #30 Text 0 File WriterStatus.cpp, Line 242
falling back to disc fixation

11:35:19 PM #31 Text 0 File Mmc.cpp, Line 12161
<OPTORITECD-RW CW4801 > start Close Session

11:35:19 PM #32 SCSI -1176 File Cdrdrv.cpp, Line 1196
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x04

11:35:19 PM #33 MMC -1176 File WriterStatus.cpp, Line 233
Session fixation error

11:35:19 PM #34 TRANSFER -19 File WriterStatus.cpp, Line 233
Could not perform Fixation

11:35:19 PM #35 Phase 38 File dlgbrnst.cpp, Line 1649
Burn process failed at 24x (3,600 KB/s)

11:35:19 PM #36 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\nvidesm.sys': Ver=5.10.2600.0307 built by: WinDDK, size=20224 bytes, created 11/13/2002 3:10:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[JPMiller]

There are a couple generic things you can do for cdrw...
enable or disable DMA in "device manager"...( Start-Settings-Control Panel-System-Device manager-cdrom-properties)
download latest bios flash for cdrw and flash the drive...
http://cdmate.copystar.com.tw/enu/re...ist/list_o.htm
and updating Nero almost always helps...
http://www.nero.com/en/index.html#c1002822532486

[Gouki]

If you've tried different programs and you still have problems...then to me it sounds like there's a problem with your ASPI drivers. See if you can get ahold of the latest ASPI drivers and try it again...

[Target]

I'm with Gouki on this.... look for an updated ASPI layer. The support page for your Optorite drive should have one available for download that is probably more current than the one it shipped with.

Download and install that and see if it cures your issue.

[austintatious]

nope, i figured it out, it was the whole "can't use nforce2 IDE drivers deal"
had to revert to default microsoft dual channel ide driver

[Gouki]

Cool. Glad you got it figured out...

And btw...Welcome to TechIMO!

[austintatious]

ty, i'm fairly knowledgable about all things...to be quite blunt, heh.

[RedFury]

Well, that'll get you further in life than specializing ( for the most part ).

Jack of all trades, master of few.

[infirmus]

I have that exact same problem...and i also have nforce 2 ide drives...hmm i think ill give it a go. Can you tell me a link to more info?

[MrGravis]

I am having the same problem. I changed back to the windows IDE drivers but now it keeps saying there is no media in the drive.

When I reinstall the nForce drivers I can see discs in the drive but I can't burn.

What I can do though is brun from CD to CD just not from HD to CD.

What should some of the DMA settings be. They sau Ulta DMA mode 2 now.