PSU "adapter plate" for a Chieftec Dragon case

[EndobioticChaos]

Apparently the Chieftec Dragon cases are designed to take an oversized PSU, and so you need a special adapter to use a normal sized PSU in it. I built a system for a friend, using this case but with the PSU included. It came with the oversized PSU, but no adapter plate... and now I need to put a different PSU in it. So where can I get one of these adapters?

[zepper]

Are you sure it came with an oversized PSU? The bracket is just a flat piece of metal with threaded holes to line up with the case and unthreaded holes to line up with threaded holes in the PSU. If there really is no bracket, Chieftec should be able to help you out. I have had no problem dealing with Enlight or Antec when I heve needed to get specialized parts like that. If Chieftec isn't helpful, try Antec. As those cases are all the same ChenMing variants. If neither are helpful try one of the other half-dozen companies that sell the same case under their names or go straight to the Source - ChenMing...
.bh.

[EndobioticChaos]

Yes, it came with an oversized PSU. The PSU was a Foxconn Austin, which I have yet to find for sale by itself anywhere.

Thanks for the tips. I'll try to get in touch with Chieftec and see what they have to say.

[Idigguns]

Try this number for Antec... 1-888-542-6832

[EndobioticChaos]

Thanks, will do.