Foxconn BIOS FLAsH gone wrong

[sksingh]

well i needed to flash my bios and i accidently uploaded the wrong bios on to motherboard. i uploaded 865mo6A and it should have been m06b. now the computer does not start up. after the post screen it just goes dead nothing. it is reading the floppy but nothing is happening. is their a way to put the old bios settings??

thank you

[zepper]

There is almost always a procedure to recover using an automated reflash via a floppy disk boot. The procedure should be on the Foxconn site. Otherwise you may have to order a pre-flashed BIOS chip and swap it out (hoping yours is socketed). Most mobo companies offer that service and some will apply a credit if you send them back your old chip.

. Also send a message via their web site for to the Foxconn Tech Support crew if you can't easily find the procedure.

.bh.