need rear I/O faceplate

[bartidog]

I have a Matsonic socket 478 motherboard that has a funky I/O configuration (at least in my opinion). It's not a standard ATX with the sound card at the bottom, two serials and parallel above that, and then the USB/LAN opening under the keyboard and mouse inputs. INSTEAD, the USB/LAN openings are just above the soundcard.

I thought I'd make an attempt here to see if I could find someone with a spare I/O faceplate as there is just something not right about a missing rear plate, imho.

[crossedup]

Is it this one? Will help others help you.

http://www.matsonic.com/new/products.../mspm800-m.jpg

http://www.matsonic.com/new/productsdata/mspm800-M.htm

I feel your pain, i have a intel 845 GRG mobo with the same trouble. Ive checked about everywhere. If you find something, LMK. Ive looked. Thought about dremeling my own

[zepper]

Matsonic is pretty much the same as PC Chips - contact them and see if you can get a backplate (aka ATX I/O shield) from them. Also those are often sold on ebay but aren't cheap.
.bh.

[bartidog]

Nope that's not it --- actually the board is the MS9307. Everything looks exactly the same as a standard ATX backplate, just the USB/LAN openings are just above the soundcard. I'll try my hand at inserting a picture here of what the faceplate should look like.

Thanks for the assistance so far!

[bartidog]