L7S7A2

[rstick35]

Need help. I have a L7S7A2 motherboard version 1.1 that I justed started up with a AMD XP 2800 Barton core CPU, I have one gig DDR 400Mhz pc 3200 memory. The Advanced Chipset Setup reads CPU freq. 133 Mhz, Cpu Vcore fuction normal, Over DDR Vcc function normal, Auto detect Dram freq. enabled, cpu/dram clock ratio-1:1, Dram freq. 200Mhz, Auto detect DIMN/PCI CLK enabled. When I boot up the computer reports the CPU as a xp 2200. How do I get this board to run at 333 Mhz and see the xp-2800? I just figured it out myself, You set the CPU ratio to 12.5 by jumping pins 7&8 and 9&10, reset the bios and then you can set the fsb to 166 and away it goes. Thanks all.

[evilphantomx]

well for starters your gonna have to get that fsb set to 166.......have to check out this board somemore but thats the place to start

[rstick35]

Originally posted by evilphantomx
well for starters your gonna have to get that fsb set to 166.......have to check out this board somemore but thats the place to start

I agree, On the board is jumper FIDJP1 which sets the CPU ratio, Is this the setting I change? If so, What ratio do I want? I know 333Mhz fsb is max for the cpu as it is not unlocked but I don`t understand the ratio settings. ECS states it will run at 333 Mhz with slight overclocking but I can`t find out how to do it. rstick35