|
More Detail
I suppose, if you have trouble finding where to begin, you need to firstly backup all the data you need on the XP system. So, if you have a data partition, chuck it there...or if you have a burner etc etc
Then, it depends on the system setup. I assume that when the system was installed NTFS was used in the formatting.
Win98 will not read NTFS necessitating a reformat.
Go online, do a search for a Win98SE startup disk. Download it and extract it to a floppy.
Then insert the floppy and restart the computer...it should boot up into DOS. Type C:
Then type in format C: /q
That should quick format the drive or partition. And you should be ready to go.
========
At this point, you need to make sure the Win98SE disk is in the CD drive, type d: (or whatever the CD drive is) at the prompt. You should hear the drive spin up a bit. Then type setup....
That should launch the win98 setup and from there it gets easier
Roley
Black Frog Tech
|