Overclocking and UT2004

[Shabow]

Alright I overclocked my 1.9 GHz P4 to 2.1GHz and set my RDRAM speeds to 400 MHz.

Also, I set my Geforce4 Ti 4600 to 315 Mhz (original was 300 MHz) and my RAM speeds up about 40 Mhz.

My performance in Aquamark3 jumped from 19,000 to 26,000! So, I wanted to try out these settings in UT2004 and an error came up on the splash screen that comes up when you first click on the icon. And it something about my prossesor was at 2.1 GHz and it couldn't find a video card and also couldn't find two files. But, I went to turn off all my overclockings and it ran just fine and UT2004 booted up perfectly.

Has any one else had this problem?

[qsimpson]

Yes but in the demo version. When I purchased the retail version everything was fine.

[tony_j15]

UT04 can be very picky about overclocking. Once a patch comes out these problems should dissapate.