»
 

Go Back   ResellerRatings Store Ratings > ResellerRatings Forums > Tech Support

Reply
 
LinkBack Thread Tools Display Modes
Old 03-25-2004, 12:54 PM   #1 (permalink)
Registered User
 
Join Date: Mar 2004
Posts: 15
cIue is on a distinguished road
HELP!! New PC build not booting!

Alright, i started building a new computer, here are the specs.

- Intel 865GBF Motherboard
- Pentium 4 processor at 3.0Ghz Hyperthread 800Mhz FSB
- 2x256 MB Kingston 3200 Dual Channel Memory
- Using old 80 GB Seagate HD
- ATI 9600 SE 128 MB Graphics Card
- Using Stock 350 Watt PSU given with case.

My problem is that i have everything hooked up. I start up my computer for the first time, and nothing shows up on my monitor. I've tried it with my 15" flat panel LCD, and my old CRT monitor and both the same thing happens. Nothing even shows up like a "no signal."

I've taken out the Videocard numerous times, replaced it with an old NVIDIA stock videocard too and still get no response from either monitors.

Everything seems to turn on when i press the power switch, fans start spinning, i believe i hear either the CD-rom or HD starting up (even though HD shouldnt or CD-rom shouldnt matter with the monitor problem at hand.)

I have no clue what to do, someone please help me!

cIue is offline   Reply With Quote
Old 03-25-2004, 01:19 PM   #2 (permalink)
Registered User
 
Join Date: Oct 2001
Posts: 6,533
John Prophet is on a distinguished road
Welcome to the forum!

Have you tried reseating the memory?

---

If that doesnt work..usually the next step is to unplug all the cables and try it with just the cpu/heatsink, one stick of ram, video card....in other words unplug all the ide/floppy cables from the board...unplug the power cords to the optical drives and hard drives......if it doesnt work there...then you might have to try it with the motherboard back out of the case to see if the motherboard isnt somehow shorting on the case.

----

do you have any spare parts?? Maybe you could try another power supply in case that one is bad.



When you plug it in does the power come on by itself or do you have to hit the power button?? Sometimes if the motherboard is shorting on the case it will "come on" by itself but the video never kicks on etc.

----------------
__________________
"Even a fool is thought to be wise if he is silent"
John Prophet is offline   Reply With Quote
Old 03-25-2004, 01:30 PM   #3 (permalink)
Registered User
 
agathodaimon's Avatar
 
Join Date: Aug 2002
Location: Lincoln, NE
Posts: 794
agathodaimon is on a distinguished road
Did you make sure to plug in the 4-Pin power supply connector to the motherboard?
Maybe your power supply didn't come with one and you overlooked it, but that's the connector that supplies power to the CPU, otherwise, it will start up like you say, but never post. I've had it happen to me before... heh.
agathodaimon is offline   Reply With Quote
Old 03-25-2004, 01:46 PM   #4 (permalink)
Registered User
 
Join Date: Mar 2004
Posts: 15
cIue is on a distinguished road
thanks for the replies. I took out all IDE plugs ect. and took the motherboard out of the case. I have it on an anti-static wrap ontop of the case.

I first tried testing it out of the case with just the video card, one stick of memory (256) and the CPU/Heatsink. i DO have the 4 pin connector from the PSU to the powersupply in. Once i started it up i still got no monitor, but this time got 3 long beeps.

I thought it was the PSU so i tried using my old sony vaio PSU. put on the adapters same as the new PSU and tried it, still nothing.

I also tried putting in my old PC2100 sony vaio memory to see if it was the memory, but still getting the three long beeps.

im going crazy here. please someone help.
cIue is offline   Reply With Quote
Old 03-25-2004, 01:49 PM   #5 (permalink)
Registered User
 
Join Date: Oct 2001
Posts: 6,533
John Prophet is on a distinguished road
what kind of bios chip is it? Award? or another?

basically you have to find what the 3 long beeps signify...


anyone know??
__________________
"Even a fool is thought to be wise if he is silent"
John Prophet is offline   Reply With Quote
Old 03-25-2004, 01:57 PM   #6 (permalink)
Registered User
 
agathodaimon's Avatar
 
Join Date: Aug 2002
Location: Lincoln, NE
Posts: 794
agathodaimon is on a distinguished road
If it's an Award Bios...

http://bioscentral.com/beepcodes/awardbeep.htm

Three beeps indicates a video adapter problem... That is if it's one long and two short beeps.
it doesn't say anything about three long beeps. hmm.
agathodaimon is offline   Reply With Quote
Old 03-25-2004, 02:09 PM   #7 (permalink)
Registered User
 
Join Date: Mar 2004
Posts: 15
cIue is on a distinguished road
okay. my bios is located below on this intel page.

http://intel.com/design/motherbd/bf/bf_bios.htm

But i changed around a couple of things, and there are no more beeping so theres no problem in that anymore. but still my monitor does not show anything. please help.
cIue is offline   Reply With Quote
Old 03-25-2004, 02:21 PM   #8 (permalink)
Registered User
 
agathodaimon's Avatar
 
Join Date: Aug 2002
Location: Lincoln, NE
Posts: 794
agathodaimon is on a distinguished road
Hmm... I don't think I know the answer to your problem.

The only thing that I could possibly think of would be if your video card needs to have a seperate power supply plug plugged in, but last I knew, 9600 cards didn't use those.

Could just be a bad board... Who knows. anyone have any other ideas?
agathodaimon is offline   Reply With Quote
Old 03-25-2004, 02:24 PM   #9 (permalink)
Registered User
 
Join Date: Mar 2004
Posts: 15
cIue is on a distinguished road
oh great. i've stumped the geniuses. and i thought this would be a smoothe build. this is rattling my brain.
cIue is offline   Reply With Quote
Old 03-25-2004, 02:28 PM   #10 (permalink)
Registered User
 
Join Date: Oct 2001
Posts: 6,533
John Prophet is on a distinguished road
there is no extra power connector on the video card?

u put in an old video card....if the new board is 8x...maybe the old card is too old to work....8x wont work with 1x cards...Im not sure about 2x cards.
__________________
"Even a fool is thought to be wise if he is silent"
John Prophet is offline   Reply With Quote
Reply




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Most Active Discussions

Recent Discussions

All times are GMT -6. The time now is 07:46 PM.