d-link di-604

[sonic24ca]

can someone help me.....i got a d-link di-604 and i dont know how to install it....it says to go threw the wizard but i can get that to work either.....i really need help......helpline for d-link is close this weekend.............HELP

[Bill in SD, CA]

Welcome to TechIMO!!

Which revision is it?

http://www.dlink.com/products/suppor...kInstallGuides

Bill

[The_Saint]

After you plugged in the Modem and the PC to the router open internet explorer and type 192.168.0.1 (I think is this one for D-Link Routers)

It will ask for a username and password so just enter whatever default U/P the Router has ( something like admin / password) and from then choose the settings that apply to your ISP and PC.)

Hope this helps.

[robin801]

the user name is---admin
the password is---you leave this blank

robin

[teengeek88]

i have this router and The_Saint is correct go to that webaddress dont forget the HTTP://

HTTP://192.168.0.1

good luck

[sonic24ca]

Hi everyone!!!!thanks for getting back to me..........When i do that it says page cannot be displayed...what iam i doing wrong?

[jmebonner]

Sonic, just click reply on the original thread to ask more questions. and WELCOME to TIMO!!

[sonic24ca]

i didnt know.....sry

[The_Saint]

Try to click on this link....

HTTP://192.168.0.1

plus check if you connected the Router correctly.

1 - From the NIC on the PC ---> to port 1 or 2 or 3 or 4 on the Router

2 - From the Modem ----> to Internet port on the Router.

3 - Click on the link I typed above.

[sonic24ca]

hi i checked and eveything is hooked up right...the three lights lite and i still cant get it to work......is the any setting i have to change in the control panel?