Ok, I am not sure if anyone is able to help me here, but...
I am running NERO and an ARTEC WRR-52Z, and the drive is less than a month old, and already, I am having issues burning. I thought I knew what was happening, but it seems that after going through 5 cd's, it's being a pain in my butt!!!
So far, when I try and burn any type of cd, be it data, or music or anything, it is coming up with errors once the cd is done burning, and it says some files cannot be read. I have tried the files, and they are fine. Checked for viruses and everything.
This is the last log I got from Nero...
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 3:37:36 PM
Nero Version: 5.5.10.45 (Nero Express)
Recorder: <ARTEC WRR-52Z> Version: 1.25 - HA 1 TA 0 - 5.5.10.45
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ARTEC WRR-52Z> Version: 1.25 - HA 1 TA 0 - 5.5.10.45
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : ST320413A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ARTEC WRR-52Z atapi Port 1 ID 0 DMA: On
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260592kB)
Free physical memory: 72MB (74008kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
24.2.2004
CD-ROM (ISO)
10:42:27 PM #1 Text 0 File Isodoc.cpp, Line 7589
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:42:27 PM #2 Phase 75 File dlgbrnst.cpp, Line 1655
JustLink activated
10:42:27 PM #3 Text 0 File Reader.cpp, Line 115
Reader running
10:42:27 PM #4 Text 0 File Writer.cpp, Line 125
Writer ARTEC WRR-52Z running
10:42:27 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)
10:42:28 PM #6 Text 0 File Burncd.cpp, Line 3749
Turn on Track-At-Once, using CD-R/RW media
10:42:28 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 34555 (34555) = #34555/7:40.55
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
10:42:41 PM #8 Text 0 File DlgWaitCD.cpp, Line 225
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 46554 (10:22.54)
10:42:41 PM #9 Text 0 File DlgWaitCD.cpp, Line 230
Write in overburning mode: FALSE
10:42:41 PM #10 Text 0 File DlgWaitCD.cpp, Line 1700
Recorder: ARTEC WRR-52Z;
CDR code: 00 97 24 16; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
10:42:47 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder ARTEC WRR-52Z for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 2 to 2:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 71075840
10:42:47 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 2.
10:42:47 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 34555 (34555) = #34555/7:40.55
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 34553 blocks [ARTEC WRR-52Z ]
--------------------------------------------------------------
10:42:47 PM #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started
10:42:47 PM #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed
10:42:47 PM #16 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 52x (7,800 KB/s)
10:42:47 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #12000
10:42:47 PM #18 Text 0 File Mmc.cpp, Line 18670
Set BUFE: JustLink -> ON , JustSpeed : ON
10:43:16 PM #19 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
10:43:18 PM #20 Text 0 File Mmc.cpp, Line 13669
<ARTEC WRR-52Z > start Close Session
10:43:28 PM #21 SCSI -1039 File Cdrdrv.cpp, Line 1241
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x09 0x02
10:43:28 PM #22 MMC -1039 File ThreadedTransferInterface.cpp, Line 994
Focus or tracking error
10:43:28 PM #23 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 994
Could not perform Fixation
10:43:28 PM #24 Text 0 File Mmc.cpp, Line 13669
<ARTEC WRR-52Z > start Close Session
10:43:42 PM #25 SCSI -1176 File Cdrdrv.cpp, Line 1241
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x72 0x00
10:43:42 PM #26 MMC -1176 File ThreadedTransferInterface.cpp, Line 994
Session fixation error
10:43:42 PM #27 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 994
Could not perform Fixation
10:43:42 PM #28 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 52x (7,800 KB/s)
10:43:42 PM #29 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 8:24:08 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 12:27:50 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
ANy suggestions???? THanks so much!!!
Linear Mode
