Hi I am newb.LOL
I really do not what I did, but I can not burn CDs. At first I bought a new CDRW drive. LiteOn CDRW-LTR52327s, yeah-yeah nice brand name, but it only cost $20 after rebates. And this thing was awesome. Was? Yes, I burned about 20 CDs and poof no more. So I checked the IDE cables, pins in the unit to no avail. So I figured this ol' jewel was just junk. I then reinstalled my old Creative CDRW-RW8438E, which is way slow, and it didn't work. Not sure what I did, played around with drivers etc. And it finally worked, kinda. I can simulate a notepad file, but if I try to simulate a compilation, I get errors;
Windows 98 4.90 (ME)
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 4:03:58 PM
Nero Version: 5.5.10.30 (Nero Express)
Recorder: <CREATIVE CD-RW RW8438E> Version: FC03 - HA 0 TA 1 - 5.5.10.30
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HITACHI DVD-ROM GD-7500>Version: 0005 - HA 0 TA 0 - 5.5.10.30
Adapter driver: <ESDI_506> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
HITACHI DVD-ROM GD-7500 (Target 0, D
: Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
CREATIVE CD-RW RW8438E (Target 1, E
: Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 127MB (130508kB)
Free physical memory: 0MB (80kB)
Memory in use : 96 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
24.2.2004
CD-ROM (ISO)
9:45:47 PM #1 Text 0 File Isodoc.cpp, Line 7576
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
9:45:48 PM #2 Text 0 File Reader.cpp, Line 115
Reader running
9:45:48 PM #3 Text 0 File Writer.cpp, Line 125
Writer CREATIVE CD-RW RW8438E running
9:45:48 PM #4 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)
9:45:48 PM #5 Text 0 File Burncd.cpp, Line 3736
Turn on Track-At-Once, using CD-R/RW media
9:45:48 PM #6 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 6548 (6548) = #6548/1:27.23
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
9:45:48 PM #7 Text 0 File DlgWaitCD.cpp, Line 222
Last possible write address on media: 359845 (79:59.70)
Last address to be written: 6547 ( 1:29.22)
9:45:48 PM #8 Text 0 File DlgWaitCD.cpp, Line 227
Write in overburning mode: FALSE
9:45:48 PM #9 Text 0 File DlgWaitCD.cpp, Line 1679
Recorder: CREATIVE CD-RW RW8438E;
CDR code: 00 97 32 18; OSJ entry from: Prodisc Technology Inc.
ATIP Data: ?
9:45:48 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder CREATIVE CD-RW RW8438E for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 13717504
9:45:48 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.
9:45:48 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 6548 (6548) = #6548/1:27.23
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 6546 blocks [CREATIVE CD-RW RW8438E ]
--------------------------------------------------------------
9:45:48 PM #13 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started
9:45:48 PM #14 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed
9:45:48 PM #15 Phase 32 File dlgbrnst.cpp, Line 1655
Simulation started at 8x (1,200 KB/s)
9:45:48 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
9:46:21 PM #17 SCSI -1093 File Cdrdrv.cpp, Line 1416
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03DD0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x6C 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00
[b] -=============ERROR BEGINS HERE++++++++++[b\]
9:46:21 PM #18 MMC -1093 File Writer.cpp, Line 333
No seek complete
9:46:21 PM #19 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
9:46:21 PM #20 CDR -201 File WriterStatus.cpp, Line 153
Invalid write state
9:46:21 PM #21 TRANSFER -18 File WriterStatus.cpp, Line 153
Could not perform EndTrack
9:46:21 PM #22 Phase 34 File dlgbrnst.cpp, Line 1655
Simulation failed at 8x (1,200 KB/s)
9:46:21[b] #23 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated[b\]
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 6/8/2000 5:00:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/2002 12:55:38 PM
File 'IoSubsys\asapi.vxd': Ver=5, 1, 0, 2, size=14581 bytes, created 9/1/1998 12:33:10 PM
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 6/8/2000 5:00:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 6/8/2000 5:00:00 PM
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 6/8/2000 5:00:00 PM
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 6/8/2000 5:00:00 PM
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 6/8/2000 5:00:00 PM
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 6/8/2000 5:00:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 6/8/2000 5:00:00 PM (Adapter driver for rec)
Registry Keys:
-----------------------------------------------------------------------------------
Keep in mind that my device manager for both drives always indicated that the drive is present and working properly. Upon an ASPI check, it reads, "ASPI is not properly installed. One or more components have been replaced with older versions of the software.
Please tell me someone can help. I have been all over the web. This is my first forum visit on this matter.
edit-ignore the smileys above, it should read drive letter asignments. LOL
Linear Mode
