Windows 98 Geforece2 Mx

[xStaRx]

I'm having a problem installing a card my friend gave me. When I put it in the AGP slot, and plug everything back in. My tower just keeps making a beeping noise, and my monitor wont recieve the input (i guess) it wont display anything when plugged into the card. Do I need to tell BIOS to shut up with the intigrated grpahics? And how do I do that?

[osprey4]

Yes, you probably need to disable the integrated graphics. Not knowing your system, I can't tell you exactly how to do it but there should be a setting somewhere regarding integrated video or something like that.

Do you know how to get into the system setup (BIOS)?

[xStaRx]

Yes I know how to get into BIOs. I changed the graphics output from PCI to AGP. but how do I turn off the intigrated graphics?

The system's a four or so year old HP Pavillion 4445. Mobo is unknown.

[osprey4]

Here are some general instructions. Looks like you must disable the integrated graphics in Windows first. Perhaps there is no way to do this in the BIOS. I have an old Dell Optiplex with the same setup.

[arthur888]

Many older computers have a jumper on the mainboard to disable integrated graphics. I'll see if I can find anything specific on your mainboard.

[arthur888]

Some sources say that this Asus mainboard was used in the Pavillion 44xx series:

http://www.motherboards.org/files/ma.../mezvm-101.pdf

It says something about disabling integrated graphics in the jumper settings section, might be useful. Good luck with it

[edit]

http://h20015.www2.hp.com/en/documen...cName=bph05160

Falcon Asus MEZ-VM: 4407(H), 4409, 4411(H), 4413, 4416, 4420, 4422, 4425, 4430, 4435, 4445, 4450, 4451, 4455, 4456, 4457, 4460? , 4463, 4473, 4483, 4536, US/CAN 4540, 4541, 4546Z, 4550Z, 6413(H), 6465, 6467, 6468, 6475Z, 6532, 8520, 8561

source: http://www.elhvb.com/mboards/Intel/HP.html

[/edit]